Sidebar
$75.00
25° Angled Abutment for on Implant - 4.8 (RN) - 23.009
- Straumann Tissue Level®, Compatible
- SKU:
- 23.009
- Platform Size:
- 4.8
- Platform Name:
- RN
- Implant Diameter:
- 4.1/4.8
- Angle:
- 25°
- Connection To:
- on Implant
YOU MIGHT ALSO NEED
Final Screw for on Implant - 4.1/4.8/6.5 (RN/WN) - 19.026
$13.00
This is a final screw that takes a Straumann® Torx driver. Torque is 35ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
It...
This angled abutment comes with a screw that takes the Straumann® Torx driver - SKU 19.026
This abutment is prep-able with a 2mm collar height.
Please visit our Community Topics
CUSTOMERS ALSO VIEWED
15° Angled Abutment for on Implant - 4.8 (RN) - 22.009
$75.00
This angled abutment comes with a screw that takes the Straumann® Torx driver - SKU 19.026
This abutment is prep-able with a 2mm collar height.
Straight Abutment for on Implant - 4.8 (RN) - 13.009
$54.00
This straight abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.026
It is a prep-able abutment with a 2mm collar height.
ANGLEBase® - Engaging (RB) - 37.062
$39.00
The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for...
C-Base - Engaging - 4.8 (RN) - 59.009
$58.00
The C-Base® ti base is gold anodized and the chimney is presandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing...
ANGLEBase® - Engaging - 4.1/4.8 (RC) - 37.044
$39.00
The AngleBase® ti base comes with an angulated screw, SKU 19.443 that takes the DESS angulated screw channel driver.
The torque is 35 ncm.
This ti base is used for changing the screw...
ANGLEBase® for on Implant - Non Engaging - 4.8 (RN) - 36.046
$39.00
The AngleBase® ti base comes with an angulated screw, SKU 19.446 that takes the DESS angulated screw channel driver.
The torque is 35 ncm.
It's used for changing the screw access hole...