This ti base comes with a final screw, part #19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height. Wax up sleeve sold separately - 33.001P5.

This ti base comes with a final screw, part #19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height. Wax up sleeve sold separately - 32.001P5.

This ti base comes with a final screw, part #19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - 33.001P5.

This ti base comes with a final screw, part #19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - 32.001P5.

This ti base comes with a final screw, part #19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - 33.001P5.

This ti base comes with a final screw, part #19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - 32.001P5.

This ti base comes with a final screw, part #19.043 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base is intended for use for a BioHorizons Conical Connection - Internal Hex.  It has a 0.8mm collar height.

This ti base comes with a final screw, part #19.043 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base is intended for use for a BioHorizons Conical Connection - Internal Hex.  It has a 0.8mm collar height.

This ti base comes with a final screw, part #19.043 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base is intended for use for a BioHorizons Conical Connection - Internal Hex.  It has a 0.3mm collar height.  

This ti base comes with a final screw, part #19.043 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base is intended for use for a BioHorizons Conical Connection - Internal Hex.  It has a 0.8mm collar height. Wax up...

This five pack of castable sleeves will fit DESS Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical Connection Internal...

This ti base comes with a final screw, part #19.043 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base is intended for use for a BioHorizons Conical Connection - Internal Hex.  It has a 0.8mm collar height.  

This ti base comes with a final screw, part #19.043 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base is intended for use for a BioHorizons Conical Connection - Internal Hex.  It has a 0.3mm collar height. Wax up...

This five pack of castable sleeves will fit DESS Non Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical Connection Internal...