This driver is used on DESS Converter Abutments. The other end of this driver is a 4x4/square connection that fits into a torque wrench.

This is a DLC final screw that takes a Nobel® Unigrip/Star driver.   Torque is 35ncm. It is the replacement screw for the Nobel® Active - 3.5(NP) - 17º and 30º angled multiunit abutments - part...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 20ncm. It is the replacement screw for the Nobel® Replace - 4.3 (RP) - 17º and 30º angled multiunit abutments - part numbers: 41...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 20ncm. It is the replacement screw for the Nobel® Active - 4.3/5.0(RP) - 17º and 30º angled multiunit abutments - part numbers: 41.708/x...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 20ncm. It is the replacement screw for the Nobel® Branemark - External Hex - 4.3(RP) - 17º and 30º angled multiunit abutments - part numbers:...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. It is the replacement screw for the Nobel® Branemark - External Hex - 3.5(NP) - 17º angled multiunit abutments - part number: 41.701/x. A DLC coating is...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. It is the replacement screw for the Nobel® Replace - 3.5 (NP) - 17º angled multiunit abutments - part number: 41.704/x. A DLC coating is a...

This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm. It is the replacement screw for the Zimmer®/BioHorizons® - Internal Hex - 3.5 - 17º and 30º angled multiunit abutments - part...

This latch style driver is made of stainless steel and is compatible with .090mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with Ankylos® 1.00mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with 1.22mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with 1.25mm hex screws. Heat treated for increase durability and wear resistant. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with 1.5mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with 1.7mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with 1.75mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .090mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with 1.25mm hex screws. Heat treated for increase durability and wear resistant. Includes laser marked identification.

This latch style driver has a square 1.30 hex tip. It's heat treated for increased durability and wear resistance. Includes laser marked identification.

This 1.30mmD square latch style driver is made of stainless steel.  It is heat treated for increased durability and wear resistance. Includes laser marked identification.