This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm.
This screw is compatible with MIS® Seven 3.0, MIS® C1 SP, and MIS® V3 NP.
All of our screws...
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons®...
This ti base comes with a wax up sleeve and a final screw, SKU 19.081 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1mm collar height.
This ti base comes with a final screw, SKU 19.058 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 0.45mm collar height and is no longer being made with...
This ti base comes with a final screw, SKU 19.056 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.073 that takes a .048/1.2mm hex driver.
The torque is 30 ncm.
This ti base has a 1mm collar height and is no longer...
This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 1.2mm collar height and is no longer being...
This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1mm collar height and is no longer being made with an...
