This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .050/1.27mm hex driver.

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .050/1.27mm hex driver.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use.

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction. This...

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

Chrome Cobalt Interfaces are designed for casting or laser welding screw retained restorations. They include a 10mm wax up sleeve and a final screw - SKU 19.044

Chrome Cobalt Interfaces are designed for casting or laser welding screw retained restorations. They include a 10mm wax up sleeve and a final screw - SKU 19.044

Chrome Cobalt Interfaces are designed for casting or laser welding screw retained restorations. They include a 10mm wax up sleeve and a final screw - SKU 19.044

Chrome Cobalt Interfaces are designed for casting or laser welding screw retained restorations. They include a 10mm wax up sleeve and a final screw - SKU 19.044

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.