This angled multiunit abutment comes with a screw that takes the Straumann® torx driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections: Nobel® Active, Nobel® Replace, and...

This angled multiunit abutment comes with a screw that takes the Straumann® torx driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections: Nobel® Active, Nobel® Replace, and Nobel®...

This angled multiunit abutment comes with a screw that takes the .050/1.27 hex driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections: Nobel® Active, Nobel® Replace, and...

This angled multiunit abutment comes with a screw that takes a Straumann® Torx driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections: Nobel® Active, Nobel®Replace, and...

For stone and digital models. For the 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters.

For stone and digital models. For the 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters.

This analog is for both stone model and digital model use. This analog is for the Straumann Screw Retained Abutments (SRA) only.

This analog is for digital models and comes with screw. 

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.098

This is a 10 pack of final screws that takes a Straumann® Torx driver.  Torque is 15ncm. These screws are used on top of the Straumann Screw Retained Abutment (SRA) only. All of our screws are stress tested to 150% of the nominal torque...

For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. This healing abutment is screwed into the implant using a Straumann® Torx driver. Designed for bridge restorations.

For 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. This healing abutment is screwed into the implant using a Straumann® Torx driver. Designed for bridge restorations.

For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. This healing abutment is screwed into the implant using a Straumann® Torx driver. Designed for bridge restorations.

This healing abutment is for the Straumann® BLX implant. It is made of titanium and designed to manage the tissue for single unit and multiple implant sites.

For 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. This healing abutment is screwed into the implant using a Straumann® Torx driver.

For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. This healing abutment is screwed into the implant using a Straumann® Torx driver.