This analog is for both stone model and digital model use. Anodized with the color blue. This is for the Megagen Anyridge platform for the following implant diameters - 4.0,4.5,5.0.5.5,6.0,6.5,7.0.7.5,8.0 mmD. The Megagen Anyridge 3.5 implant diameter...

This 10 pack of analogs is for both a stone model and a digital model use. Anodized with the color blue. This is for the Megagen Anyridge platform for the following implant diameters - 4.0,4.5,5.0.5.5,6.0,6.5,7.0.7.5,8.0 mmD. The Megagen Anyridge 3.5...

The AngleBase® ti base comes with an angulated screw, SKU 19.460 that takes the DESS angulated screw channel driver. The torque is 25 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.460 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. This is for the Megagen Anyridge platform for the following...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings.  

This scan body is made of titanium and is designed for both intraoral use and desktop scanning. It has a fixed internal screw and the scan body is hand tightened.  

This PEEK intra-oral scan body drivers enables you to tighten and loosen the intra-oral scan body in hard to reach areas. These are autoclavable and reusable. 

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Item includes screw: 19.057. This is for the Megagen Anyridge platform for the following implant diameters - 4.0,4.5,5.0.5.5,6.0,6.5,7.0.7.5,8.0 mmD. The Megagen...

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This premilled chrome cobalt blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.057 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.057 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This ti base comes with a final screw, SKU 19.057 that takes a .050/1.27mm hex driver. The torque is 35 ncm. This ti base has a 2mm collar height. Wax up sleeve sold separately - SKU 33.001P5 This is for the Megagen Anyridge platform for the...

This ti base comes with a final screw, SKU 19.057 that takes a .050/1.27mm hex driver. The torque is 35 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001-P5 This is for the Megagen Anyridge platform for the following...

This ti base comes with a final screw, SKU 19.057 that takes a .050/1.27mm hex driver. The torque is 35 ncm. This ti base has a 2mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold separately...

This ti base comes with a final screw, SKU 19.057 that takes a .050/1.27mm hex driver. The torque is 35 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001-P5 This is for the Megagen Anyridge platform for the following...

This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical Connection Internal...