Neodent GM®

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

Impression transfers come prepackaged with both an open and closed tray screw. The Neodent GM® has the same platform for all implant diameters. The screws can be hand tightened or tightened with a Neodent® Driver.  

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This PEEK intra-oral scan body carrier enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This PEEK intra-oral scan body extender enables you to clip it on to the intraoral scan body in hard to reach areas.5.5mm extra height, designed for optimal use in deep implant positions.These are autoclavable and reusable. 

This latch style driver is made of stainless steel and is compatible with .048/1.20mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This 24mm length latch style driver is for Neodent GM®.

This 30mm length latch style driver is for Neodent GM®.

This 35mm length latch style driver is for Neodent GM®.

This manual driver for intra-oral scan body enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

NO RETURN ON THIS PRODUCT. This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It also comes with the final screw (SKU 19.575). Holders for premills: Holder HLDSTD - 98mm disc holder -...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It also comes with the final screw (SKU 19.575). Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are...

This premilled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It also comes with the final screw (SKU 19.575). Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 20ncm. It is compatible with Hiossen® (Osstem®) - Mini, Camlog® - 3.8 and 4.3, and Neodent® GM...

Use from Neodent® or DESS® Neodent® compatible driver https://www.dess-usa.com/neodent-gm-drivers/. One implant platform/connection for all implant diameters. Recommended Torque: 20NCM.

This straight MUA+ come with a screw that takes the Neo screwdriver. A ZrN Surface Coating that provides less plaque adhesion and less gingival inflammation. It is compatible with the following top of Multiunit Abutments:3i Biomet Certain® Low...