Zimmer® Internal Hex compatible

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.

This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm.  It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5, 4.5, and 5.7; and MIS® Seven - Standard and Wide. All of our...

This is a 10 pack of final screws that take a .050/1.27mm hex driver. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5 , 4.5, and 5.7; and MIS® Seven - Standard and Wide. All of our screws are stress...

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.

This healing abutment is screwed into the implant using a .050/1.27mm hex driver.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This is a 10 pack of final screws that takes a .050/1.27mm hex driver.  Torque is 30ncm.  It has a narrow head diameter to fit the original Zimmer® abutments. All of our screws are stress tested to 150% of the nominal torque value and can...

This is a final screw that takes a .050/1.27mm internal hex driver.  Torque is 30ncm.  It has a narrow head diameter that fits the original Zimmer® abutments. All of our screws are stress tested to 150% of the nominal torque value and can...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet mills...

This pre-milled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet mills...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal Hex - 3.5, 4.5, and 5.7;...

This straight abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.042 It is a prep-able abutment with a 2mm collar height.

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.042

This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.042