This Ti base has a ⌀3.85mm and comes with a final screw, SKU 19.042 that takes a Hex 0.050" / 1.27mm driver.
The torque is 30 Ncm.
This ti base has a 0.8mm collar height and is being made with an...
This ti base has a ⌀3.85mm and comes with a final screw, SKU 19.042 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. To use this product correctly,...
The C-Base® ti base is gold anodized and the chimney is presandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing...
The C-Base® ti base is gold anodized and the chimney is presandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing...
The C-Base® ti base is gold anodized and the chimney is presandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing...
This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This...
This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal...
Impression transfers come prepackaged with both an open and a closed tray screw.• a long screw for an open tray and a short screw for a closed tray
The screws can be hand-tightened or tightened with...
The ELLIPTIBase® Ti base includes the final screw (SKU 19.417) and the torque is 30 Ncm. The ELLIPTIBase® Ti base is used for changing the screw access hole up to 20 degrees in any direction and is gold anodized to improve aesthetics. The ANGLEBase® Latch Driver is required. The ELLIPTIBase® Ti base has a vertical wall for maximum bond retention with gold anodized and a SelectGrip® pre-sandblasted chimney. The chimney is oval “egg shaped” with the longer axis 3.3 mm from buccal to lingual and the shorter axis 2.8 mm from mesial to distal. "A corner" is identified as "Type A" in the library files, and "B flat" is identified as "Type B" in the library files. Explanation of ELLIPTIBase® Flat vs Corner
