This final screw that takes a .050/1.27mm hex driver. Torque is dg15ncm.
It is compatible with Astra® Osseospeed - UniAbutment 20º and 45º.
This screw has a M1.4 screw thread and can be used on any of these multiunits from Nobel®, BioHorizons®, 3i® Biomet®, Megagen®, Hiosson®, Neodent®, BSB®, Keystone®, Genesis/Prima®, Astra EV® Multibase and DESS.
DESS library files will enable you to create a bridge directly to the MUA without a ti base and utilize the 19.018 screw.
It is also available in a pack of 10 - SKU 19.018P10
This final screw that takes a .050/1.27mm hex driver. Torque is dg15ncm.
It is compatible with Astra® Osseospeed - UniAbutment 20º and 45º.
This screw has a M1.4 screw thread...
This final screw that takes a .050/1.27mm hex driver. Torque is dg15ncm.
It is compatible with Astra® Osseospeed - UniAbutment 20º and 45º.
This screw has a M1.4...
This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15ncm.
It is compatible with the following multiunit connections: Nobel® Active, Replace, and...
This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15...
This is a 10 pack of final screws that take a Nobel® Unigrip/Star driver. Torque is 15ncm.
It is compatible with the following multiunit connections: Nobel® Active,...
This is a final screw that takes a .050/1.27mm hex driver. Torque is 15ncm.
It is compatible with the following multiunit connections: Nobel® Active, Replace, and Branemark...
This is a final screw that takes a .050/1.27mm hex driver. Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.