This ti base comes with a wax up sleeve and a final screw, SKU 19.056 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height.

This ti base comes with a wax up sleeve and a final screw,SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height.

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a wax up sleeve and a final screw, SKU 19.085 that takes a .050/1.27mm hex driver. It is designed for use on top of the MIS® multiunit for Seven®, V3®, and C1®.   The torque is 25 ncm. This ti...

This ti base comes with a final screw, SKU 19.056 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold separately...

This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical Connection Internal...

This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical Connection Internal...