Straight Ti Bases MIS Seven® Compatible

This ti base comes with a wax up sleeve and a final screw, SKU 19.056 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height.

This ti base comes with a wax up sleeve and a final screw,SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height.

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.081 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This five pack of castable sleeves will fit on the DESS Engaging Straight Ti Bases for the following systems: Astra Osseospeed / Astra EV Ankylos BioHorizons Internal Hex / BioHorizons External Hex Biomet 3i Certain / Biomet 3i Osseotite Camlog /...