Final Screw - 3.0 - 19.071 $13.00 This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Final Screw - 3.6 - 19.059 $13.00 This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Final Screw - 4.2 - 19.060 $13.00 This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Final Screw - 4.8/5.4 - 19.061 $13.00 This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Final Screw - Mini - 19.072 $13.00 This is a final screw that takes a .048/1.2mm hex driver. Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Final Screw - Standard - 19.073 $13.00 This is a final screw that takes a .048/1.2mm hex driver. Torque is 30ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Final Screw on UniAbutment - 19.058 $13.00 This is a final screw that takes a .050/1.27mm hex driver. Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. Add to Cart
Multiunit Screw with .048 hex - 19.055 $13.00 The final screw requires the use of a.048/1.2 hex driver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10. Torque is 15ncm. Add to Cart
Screw for ANGLEBase® - 3.8/4.3/Mini - 19.444 $13.00 This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 20ncm. It is compatible with Hiossen® - Mini and Camlog® - 3.8 and 4.3. It can be used to move the screw... Add to Cart
Screw for ANGLEBase® - 4.2/AnyRidge - 19.460 $13.00 This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV 4.2 and Megagen® AnyRidge. It can be used to move the screw access... Add to Cart
Screw for ANGLEBase® - 4.8/Standard - 19.461 $13.00 This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV - 4.8 and Hiossen® - Standard. It can be used to move the screw access hole up to... Add to Cart