This final screw that takes a .050/1.27mm hex driver. It is compatible with Astra® Osseospeed - UniAbutment 20º and 45º. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is...

This is a final screw that takes a .050/1.27mm hex driver. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - 19.016P10.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. It is compatible with Nobel® Active - 3.5 (NP); Astra® Osseospeed - 3.5/4.0 (Aqua); and Astra® EV - 3.6. It...

This is a final screw that takes a .050/1.27mm hex driver. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - 19.017P10.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress tested to 150% of the nominal...

This is a 10 pack of final screws that take a .050/1.27mm hex driver.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This final screw that takes a .050/1.27mm hex driver. It's compatible with Astra® Osseospeed UniAbutment - 20º and 45º. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a 10 pack of final screws that take a .050/1.27mm hex driver.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver. This screw has a special TIN coating providing a lower friction coefficient and increased strength over the standard titanium final screw. All of our screws are stress tested to 150% of the...

This is a final screw that takes a .050/1.27mm hex driver.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.