Screws Astra® EV Compatible

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV 4.2 and Megagen® AnyRidge. It can be used to move the screw...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV - 4.8 and Hiossen® - Standard. It can be used to move the screw access hole up...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 35ncm. It is compatible with Nobel® Active - 3.5 (NP), Astra® Osseospeed - 3.5/4.0 (Aqua), Astra®...

This is a final screw for the AngleBase® Ti bases that takes the DESS Angulated Screw Channel driver. Torque is 15ncm. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress...