This ti base comes with a final screw, SKU 19.061 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 1mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold separately...

This ti base comes with a final screw, SKU 19.060 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 1mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.059 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold separately...

This ti base comes with a final screw, SKU 19.058 that takes a .050/1.27mm hex driver. The torque is 15 ncm. This ti base has a 0.45mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This analog is for both stone model and digital model use. Anodized with the color blue.

This analog is for both stone model and digital model use.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV - 4.8 and Hiossen® - Standard. It can be used to move the screw access hole up...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV 4.2 and Megagen® AnyRidge. It can be used to move the screw...

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This ti base comes with a final screw, SKU 19.060 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 1mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.059 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 1mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This analog is for both stone model and digital model use. Anodized with the color yellow.

This analog is for both stone model and digital model use. Anodized with the color purple.

This driver is used on DESS Converter Abutments 4.8 (RN). The other end of this driver is a 4x4/square connection that fits into a torque wrench.

The AngleBase® ti base comes with an angulated screw, SKU 19.306 that takes the DESS angulated screw channel driver. This ti base has a 0.3mm collar height and has a 4.5mm chimney height. The torque is 15 ncm. This ti base is used...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...