This latch style driver is made of stainless steel and is compatible with Nobel® Unigrip/Star screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Comes with screw: 19.024

This ti base comes with a final screw, SKU 19.026 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side. Wax up...

This multiunit driver fits the top of the Multiunit Abutments from DESS. The other end of this driver is a 4x4/square connection that fits into a torque wrench.

This scan body is made of PEEK Plastic and is used for scanning on a Straumann® Tissue Level 1.5 abutment or the DESS converter abutment. Screw Not Included - SKU 19.009

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.026P10

This ti base comes with a wax up sleeve and a final screw, SKU 19.009 that takes a Straumann® Torx driver. The torque is 15 ncm. This ti base is designed for use on top of the Straumann® 1.5 abutment or the DESS converter...

This ti base comes with a final screw, SKU 19.026 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.045P5

This ti base comes with a wax up sleeve and a final screw, SKU 19.009 that takes a Straumann® Torx driver. The torque is 15 ncm. This ti base is designed for use on top of the Straumann® 1.5 abutment or the DESS converter...

This analog is for both stone model and digital model use. It is designed for use with the Straumann® 1.5 abutment or the DESS converter abutment.

This healing abutment comes with a screw that takes a Nobel® Unigrip/Star driver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile & 3i Osseotite®...

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. This is for the Megagen Anyridge platform for the following...

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It is compatible with Straumann® Bone Level - 3.3 (NC) and 4.1/4.8 (RC) and 3i Certain® - Internal Hex - 3.4, 4.1, and 5.0. It can...

This latch style driver is made of stainless steel and is compatible with all of the angulated screw channel and AngleBase® screws from DESS. It provides you up to 25 degrees angulation. This driver is heat treated for increased durability and...

This latch style driver is made of stainless steel and is compatible with all of the angulated screw channel and AngleBase® screws from DESS. It provides you up to 25 degrees angulation. This driver is heat treated for increased durability and...

This latch style driver is made of stainless steel and is compatible with all of the angulated screw channel and AngleBase® screws from DESS. It provides you up to 25 degrees angulation. This driver is heat treated for increased durability and wear...

This healing abutment is screwed into the implant using a Nobel® Unigrip/Star driver.

This analog is for both stone model and digital model use.

This scan body is made of PEEK Plastic and is used for scanning at the implant level. Comes with screw: 19.024

This titanium temporary abutment comes with a screw that takes a 1.22mm hex driver - SKU 19.024