The AngleBase® ti base comes with an angulated screw, SKU 19.441 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.425 that takes the DESS angulated screw channel driver. The torque is 25 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.441 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.425 that takes the DESS angulated screw channel driver. The torque is 25 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your existing...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your existing...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your existing...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your existing...

The C-Base® ti base is gold anodized and the chimney is pre-sandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing Cerec® scan body to scan on top, your...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 35ncm. It is compatible with Nobel® Active - 3.5 (NP), Astra® Osseospeed - 3.5/4.0 (Aqua), Astra®...

This ti base comes with a wax up sleeve and a final screw, SKU 19.015 that takes a .050/1.27mm hex driver. The torque is 15 ncm. This ti base has a 1mm collar height.

This ti base comes with a final screw, SKU 19.016 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 1.1mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.016 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 0.9mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.018 that takes a .050/1.27mm hex driver. The torque is 15 ncm. This ti base has a 0.45mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a wax up sleeve and a final screw, SKU 19.015 that takes a .050/1.27mm hex driver. The torque is 15 ncm. This ti base has a 1mm collar height and is no longer being made with an anti-rotational flat side.