MIS® Seven

The CoCr (Chrome Cobalt) Castable Abutment is an affordable and versatile choice, ideal for fabricating screw-retained restorations through casting or laser welding with non-precious alloys. • IFU DESS CoCr Abutment They include a 10mm wax up sleeve...

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This DESSLoc® abutment takes the insert driver. It’s 100% cross-compatible with other inserts, metal housings, and tools used for such a solution.  

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.  This screw is compatible with MIS® Seven 3.0, MIS® C1 SP, and MIS® V3 NP. All of our screws are stress tested to 150% of the nominal...

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.   This screw is for MIS Seven, MIS C1 and MIS V3. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This PEEK intra-oral scan body carrier enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This PEEK intra-oral scan body extender enables you to clip it on to the intraoral scan body in hard to reach areas.5.5mm extra height, designed for optimal use in deep implant positions.These are autoclavable and reusable. 

This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. 

This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.