Straumann BLX® Ti Bases Compatible

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

The ANGLEBase® ti base comes with an angulated screw (SKU 19.441) that takes the DESS Angulated Screw Channel Driver. For 3.75, 4.5, 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up...

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.098

This is a 10 pack of final screws that takes a Straumann® Torx driver.  Torque is 15ncm. These screws are used on top of the Straumann Screw Retained Abutment (SRA) only. All of our screws are stress tested to 150% of the nominal torque...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 35ncm. It is compatible with Nobel® Active - 3.5 (NP), Astra® Osseospeed - 3.5/4.0 (Aqua), Astra®...

This ti base has a 1.5mm collar height, a ⌀3.85mm, and comes with a final screw (SKU 19.054) that takes a Straumann® Torx driver. For 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque:...

This ti base has a 0.8mm collar height and comes with a final screw (SKU 19.054) that takes a Straumann® Torx driver. For 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up sleeve...

This ti base has a 1.5mm collar height and comes with a final screw (SKU 19.054) that takes a Straumann® Torx driver. For 5.5 and 6.5mmD implants. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up sleeve...

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only. The torque is 15 ncm. Wax up sleeve sold separately - SKU...

This Ti base has a 1.5 mm collar height, a ⌀3.85mm, and comes with a final screw (SKU 19.054) that takes a Straumann® Torx 06 driver. One implant platform/connection for all implant diameters. Recommended torque: 35ncm.  To use...

This Ti base has a 0.8mm collar height and comes with a final screw (SKU 19.054) that takes a Straumann® Torx 06 driver. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up sleeve sold separately (SKU 33...

This Ti base has a 1.5mm collar height and comes with a final screw (SKU 19.054) that takes a Straumann® Torx 06 driver. One implant platform/connection for all implant diameters. Recommended torque: 35ncm. Wax up sleeve sold separately (SKU 33...

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. The torque is 15 ncm and is no longer being made with an anti-rotational flat side. This abutment is used on top of the Straumann Screw...