Zimmer® Internal Hex

This PEEK intra-oral scan body extender enables you to clip it on to the intraoral scan body in hard to reach areas.5.5mm extra height, designed for optimal use in deep implant positions.These are autoclavable and reusable. 

This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. 

This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. 

This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This manual driver for intra-oral scan body enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This is a 10 pack of final screws that takes a .050/1.27mm hex driver.  Torque is 30ncm.  It has a narrow head diameter to fit the original Zimmer® abutments. All of our screws are stress tested to 150% of the nominal torque value and can...

This is a final screw that takes a .050/1.27mm internal hex driver.  Torque is 30ncm.  It has a narrow head diameter that fits the original Zimmer® abutments. All of our screws are stress tested to 150% of the nominal torque value and can...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This pre-milled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This pre-milled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.042 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This pre-milled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.012 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal Hex - 3.5, 4.5, and 5.7;...

This straight abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.042 It is a prep-able abutment with a 2mm collar height.

This straight abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.042 It is a prep-able abutment with a 2mm collar height.

This straight abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.042 It is a prep-able abutment with a 2mm collar height.

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...