This is a final screw that takes a Straumann® Torx driver. Torque is 35ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
It...
The converter abutment is compatible with the Straumann® 1.5 abutment.
It can only be used with the DESS Converter Abutment Driver - Part DTSYN / Torque - 35 Ncm
The converter abutment is compatible with the Straumann® 1.5 abutment.
It can only be used with the DESS Converter Abutment Driver - Part DTSYN / Torque - 35 Ncm
This final screw that takes a 0.050/1.27mm Hex driver. Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments.
This screw has a M1.4 screw thread...
This is an Angulated Screw Channel (ASC) screw that takes the DESS Angulated Screw Channel driver.It can be used to move the screw access hole up to 25 degrees in any direction.
This screw has a M1...
This analog is for both stone model and digital model use.
It is designed for use on the Straumann® 1.5 abutment or the DESS converter abutment.
It is also available in a pack of 10 - 14.010P10