This ti base has a ⌀3.85mm and comes with a final screw, SKU 19.032 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 1.5mm collar height. To use this...
The C-Base® ti base is gold anodized and the chimney is presandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing...
The C-Base® ti base is gold anodized and the chimney is presandblasted reducing your chairside time. FDA approved with a lifetime replacement warranty on the original implant. Use your existing...
This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand...
This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 35ncm.
It can be used to move the screw access hole up to 25 degrees...
Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand...
The ELLIPTIBase® Ti base includes the final screw (SKU 19.443) and the torque is 35 Ncm. The ELLIPTIBase® Ti base is used for changing the screw access hole up to 20 degrees in any direction and is gold anodized to improve aesthetics. The ANGLEBase® Latch Driver is required. The ELLIPTIBase® Ti base has a vertical wall for maximum bond retention with gold anodized and a SelectGrip® pre-sandblasted chimney. The chimney is oval “egg shaped” with the longer axis 3.3 mm from buccal to lingual and the shorter axis 2.8 mm from mesial to distal. "A corner" is identified as "Type A" in the library files, and "B flat" is identified as "Type B" in the library files. Explanation of ELLIPTIBase® Flat vs Corner
