This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm.
This screw has a head base that is angled for a BioHorizons® Conical Connection - Internal Hex as opposed to the flat head screw for Zimmer®/BioHorizons® - Internal Hex (SKU 19.012)
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5, 4.5, and 5...
This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5, 4.5, and 5...
This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...
This titanium analog is for both stone model and digital model use. It is intended for use for a BioHorizons® Conical Connection - Internal Hex. Anodized with the color yellow.
This is a final screw that takes a .050/1.27mm hex driver. Torque is 15ncm.
It is compatible with the following multiunit connections: Nobel® Active, Replace, and Branemark...
This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver.
It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal Hex -...
This ti base comes with a final screw, SKU 19.043 that takes a .050/1.27mm hex driver.
This ti base is intended for use for a BioHorizons® Conical Connection - Internal Hex.
The...