This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV - 4.8 and Hiossen® - Standard. It can be used to move the screw access hole up...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 20ncm. It is compatible with Hiossen® - Mini and Camlog® - 3.8 and 4.3. It can be used to move the screw...

This is a final screw that takes a .050/1.27mm hex driver. This screw has a special TIN coating providing a lower friction coefficient and increased strength over the standard titanium final screw. All of our screws are stress tested to 150% of...

This is a final screw that takes a .050/1.27mm hex driver. This screw has a special TIN coating providing a lower friction coefficient and increased strength over the standard titanium final screw. All of our screws are stress tested to 150% of the...

The final screw requires the use of a.048/1.2 hex driver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10.