Holder Screws THLD-P3

TMSV-P3- Screw for Holder Torx 25 (Straight seating) - QTY 3 Screw that clamps the Pre-milled blank into the holder A+B - (works for HLDSTD – HLDIMES – HLDVHF – HLDVHFR5 – HLDYENA )

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It is compatible with Straumann® Bone Level - 3.3 (NC) and 4.1/4.8 (RC) and 3i...

This is an Angulated Screw Channel (ASC) final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any...

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. It is compatible with the following to

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. This...