Holder Screws TMSV-P3

THLD-P3 – Screw for Holder Torx 25 (Conical Setting)  - QTY 3 Screw that clamps the Holders A+B into the Holder Base - (works for HLDSTD – HLDIMES – HLDVHF – HLDVHFR5 – HLDYENA)

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It is compatible with Straumann® Bone Level - 3.3 (NC) and 4.1/4.8 (RC) and 3i...

This is an Angulated Screw Channel (ASC) final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any...

This is a final screw that takes a .048/1.20mm hex driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. This...

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. It is compatible with the following to