This is a final screw that takes a .050/1.27mm hex driver. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This ti base comes with a wax up sleeve and a final screw that takes a .050/1.27mm hex driver. It has a 1.0mm collar height and is 4.2mm above the collar.
This ti base comes with a final screw that takes a Nobel® Unigrip/Star driver.
It is compatible with the following multiunit connections: Nobel® Active, Replace, and Branemark (NP...
The AngleBase® comes with an angulated screw that takes the DESS angulated screw channel driver. It's used for changing the screw access hole up to 25 degrees in any direction. This part is gold...
The AngleBase® comes with an angulated screw that takes the DESS angulated screw channel driver. It's used for changing the screw access hole up to 25 degrees in any direction. This part is gold...
This scan body is made of PEEK Plastic and is used for scanning at the implant level. Library files are available for 3Shape, Exocad, and Dental Wings. Screw sold separately - Ref: 19.072
This is a final screw that takes a .050/1.27mm hex driver. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
