This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold. All of our screws are stress tested to 150% of the...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver.   Torque is 35ncm. A DLC coating is a diamond like coating that provides a low friction surface for a better hold. All of our screws are stress tested to...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 20ncm. It is the replacement screw for the Nobel® Replace - 4.3 (RP) - 17º and 30º angled multiunit abutments - part numbers: 41...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. It is the replacement screw for the Nobel® Replace - 3.5 (NP) - 17º angled multiunit abutments - part number: 41.704/x. A DLC coating is a diamond...

This is a final screw that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.004P10

This is a final screw that takes a Nobel® Unigrip/Star driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.005P10

This is a 10-pack of final screws that take a Nobel® Unigrip/Star driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 35ncm. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress tested...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 35ncm. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress tested...

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress tested to 150% of the nominal torque...

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress tested to 150% of the nominal torque...