Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand...
This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand...
This multiunit driver fits the top of the Multiunit Abutments from DESS. The other end of this driver is a 4x4/square connection that fits into a torque wrench.
This straight multiunit abutment and the screw are the one piece. The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment driver from Nobel®, BioHorizons®, 3i®, Neodent®, Hiossen, or MegaGen®.
It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments: 3i Biomet Certain® Low Profile & 3i Osseotite® External Hex Astra EV® Multibase Blue Sky Bio® (BSB) BioHorizons® Internal Hex, BioHorizons® Tapered Pro Conical, & BioHorizons® Conelog Hahn™ Hiossen® / Osstem Keystone® Genesis / Prima Megagen Anyridge® N Type Neodent® GM Nobel Active®, Nobel Replace®, & Nobel Brånemark® (NP and RP) Noris Medical® DESS® Multiunits
