Screws Straumann Bone Level® Compatible

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.032P10

This is a 10 pack of final screws that take a Straumann® Torx driver.   Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm. It is compatible with Straumann® Bone Level non-engaging 3.3 (NC) and 4.1/4.8 (RC) parts and all of the castable DESS abutments. All of our screws...

This is a 10 pack of final screws that take a Straumann® Torx driver.   Torque is 35ncm.  It is compatible with Straumann® Bone Level non-engaging 3.3 (NC) and 4.1/4.8 (RC) parts and all of the castable DESS abutments...

This is a final screw that takes a Straumann® Torx driver.  Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.033P10

This is a 10 pack of final screws that take a Straumann® Torx driver.   Torque is 35ncm.  All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.098

This is a 10 pack of final screws that takes a Straumann® Torx driver.  Torque is 15ncm. These screws are used on top of the Straumann Screw Retained Abutment (SRA) only. All of our screws are stress tested to 150% of the nominal torque...

This is a flat seat final screw that takes a Straumann® Torx driver.  Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19...

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. It's compatible with Straumann® Bone Level - Multi-Base and has a 45 degree head base. All of our screws are stress tested to 150% of the nominal...

This is a 10 pack of flat seat final screws that take a Straumann® Torx driver. Torque is 35ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

This is a flat seat final screw that takes a Straumann® Torx driver. Torque is 15ncm. It is compatible with Straumann® Bone Level - Multi-Base. All of our screws are stress tested to 150% of the nominal torque value and can also be used as...

This is a 10 pack of flat seat final screws that take a Straumann® Torx driver.  Torque is 15ncm. It is compatible with Straumann® Bone Level Multibase. All of our screws are stress tested to 150% of the nominal torque value and can...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 35ncm. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress tested...

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It is compatible with Straumann® Bone Level - 3.3 (NC) and 4.1/4.8 (RC) and 3i Certain® - Internal Hex - 3.4, 4.1, and 5.0. It can...