This is a final screw that takes a .050/1.27mm hex driver. Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws...
This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand...
This scan body will work on most engaging ti bases and engaging ANGLEBases® except for the following:
All C-bases
Elliptibases®
Branemark® WP
Straumann Tissue Level® RN and WN
Astra...
This ti base comes with a final screw, SKU 19.068 that takes a Nobel® Unigrip/Star driver.
The torque is 15 ncm.
This ti base has a 1.5mm collar height.
Wax up sleeve sold...
This ti base comes with a final screw, SKU 19.072 that takes a .048/1.2mm hex driver.
The torque is 20 ncm.
This ti base has a 1mm collar height.
Wax Up Sleeve sold separately...
This ti base comes with a final screw, SKU 19.060 that takes a .050/1.27mm hex driver.
The torque is 25 ncm.
This ti base has a 1mm collar height.
Wax up sleeve sold separately...
The AngleBase® ti base comes with an angulated screw, SKU 19.441 that takes the DESS angulated screw channel driver.
The torque is 35 ncm.
This ti base is used for changing the screw...
This ti base comes with a final screw, SKU 19.026 that takes a Straumann® Torx driver.
The torque is 35 ncm.
This ti base has a 0.3mm collar height and is no longer...
This ti base comes with a final screw, SKU 19.006, that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15 ncm and is...
