This is a final screw that takes a 1.22mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available...
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons® Conical...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1.5mm collar height.
Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1.5mm collar height and is no longer being made with...
This ti base comes with a final screw, SKU 19.024 that takes a 1.22mm hex driver.
The torque is 24 ncm.
This ti base has a 3mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.024 that takes a 1.22mm hex driver.
The torque is 24 ncm.
This ti base has a 1.5mm collar height.
Wax up sleeve sold separately...
This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver.
The torque is 24 ncm.
This ti base has a 0.3mm collar height.
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height. Wax up sleeve sold separately - SKU 33.001P5