This is a final screw that takes a .048/1.2mm hex driver. Torque is 20ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons® Conical...
This ti base comes with a final screw, SKU 19.073 that takes a .048/1.2mm hex driver.
The torque is 30 ncm.
This ti base has a 1mm collar height.
Wax up sleeve sold...
This ti base comes with a final screw, SKU 19.072 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.073 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver.
The torque is 25 ncm.
This ti base has a 0.9mm collar height.
Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.043 that takes a .050/1.27mm hex driver.
This ti base is intended for use for a BioHorizons® Internal Hex.
The torque is 30 ncm.
It...
This ti base comes with a wax up sleeve and a final screw, SKU 19.015 that takes a .050/1.27mm hex driver.
The torque is 15 ncm.
This ti base has a 1mm collar height.
