This is a final screw that takes a .050/1.27mm hex driver. Torque is 30ncm. It is compatible with Zimmer®/BioHorizons®/Implant Direct Legacy® - Internal hex - 3.5, 4.5, and 5.7; and MIS®...
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons®...
This ti base comes with a final screw, SKU 19.042 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 0.8mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.042 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1.5mm collar height and is no longer being made with...
This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 30ncm.
It is compatible with Zimmer®/BioHorizons®/Implant...
The AngleBase® ti base comes with an angulated screw, SKU 19.442 that takes the DESS angulated screw channel driver.
The torque is 35 ncm.
This ti base is used for changing the screw...
This ti base comes with a final screw, SKU 19.006, that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15 ncm and is...
This ti base comes with a final screw, SKU 19.030 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 1.2mm collar height. Wax up sleeve sold...
