This is a final screw that takes a 1.22mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available...
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.3mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 0.9mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.030 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 1.2mm collar height and is no longer...
This ti base comes with a final screw, SKU 19.061 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.060 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 1mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.034 that takes a .048/1.20mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height and is no longer being made...
