This is a final screw that takes a 1.22mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available...
This ti base comes with a final screw, SKU 19.024 that takes a 1.22mm hex driver.
The torque is 24 ncm.
This ti base has a 1.5mm collar height and is no longer being made with...
This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver.
The torque is 35 ncm.
This ti base has a 3mm collar height and is no longer being...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 3mm collar height.
Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1.5mm collar height.
Wax up sleeve sold separately - SKU...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 3mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 1.5mm collar height and is no longer being made with...
