This is a final screw that takes a .048/1.2mm hex driver. Torque is 20ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons®...
This ti base comes with a wax up sleeve and a final screw, SKU 19.072 that takes a .048/1.2mm hex driver.
The torque is 20 ncm.
This ti base has a 1mm collar height and is no...
One implant platform/connection for all implant diameters - the Regular Base (RB) 3.75mm, 4.0mm, 4.5mm & Wide Base (WB) 5.0mm, 5.5mm, 6.5mm
This is a final screw that takes a...
Impression transfers come prepackaged with both an open and closed tray screw.
The closed tray screw has a minimal external height in order to be used in small mouth openings.
The screws can be...
Impression transfers come prepackaged with both an open and closed tray screw.
The closed tray screw has a minimal external height in order to be used in small mouth openings.
Impression transfers come prepackaged with both an open and closed tray screw.
The closed tray screw has a minimal external height in order to be used in small mouth openings.
The screws can be...
Impression transfers come prepackaged with both an open and closed tray screw.
The closed tray screw has a minimal external height in order to be used in small mouth openings.
The screws can be...
