This five pack of castable sleeves at 0° will fit all of our AngleBase® ti bases.
The internal connection of this castable sleeve is non engaging.
The AngleBase® ti base is not designed to be...
This five pack of castable sleeves at 10° will fit all of our AngleBase® ti bases.
The internal connection of this castable sleeve is non engaging.
The AngleBase® ti base is not designed to be...
This five pack of castable sleeves at 20° will fit all of our AngleBase® ti bases.
The internal connection of this castable sleeve is non engaging.
The AngleBase® ti base is not designed to be...
This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. Torque is 15ncm.
It is compatible with the following multiunit...
The AngleBase® ti base comes with an angulated screw, SKU 19.306 that takes the DESS angulated screw channel driver.
This ti base has a 0.3mm collar height and has a 4.5mm chimney height.
The torque is 15 ncm.
This ti base is used for changing the screw access hole up to 25 degrees in any direction. This part is gold anodized to improve aesthetics.
It is compatible with the following multiunit connections: Nobel®Active, Replace, and Branemark (NP and RP), BioHorizons® Internal Hex and External Hex, 3i® Certain - Internal Hex, 3i® Osseotite - External Hex, Megagen® Anyridge (N style only), Neodent®, and DESS multiunit abutments. entitled multiunit.
This ti base comes with a final screw, SKU 19.006, that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15 ncm and is...
This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. Torque is 15ncm.
It is compatible with the following multiunit...
This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15...
The AngleBase® ti base comes with an angulated screw, SKU 19.306 that takes the DESS angulated screw channel driver.
This ti base has a 0.3mm collar height and has a 4.5mm chimney...
This final screw that takes a .050/1.27mm hex driver. Torque is 15ncm.
It is compatible with Astra® Osseospeed - UniAbutment 20º and 45º.
This screw has a M1.4 screw...
This scan body is made of titanium and is designed for both intraoral use and desktop scanning. It has a fixed internal screw and the scan body is hand tightened. It is compatible with the following...
