This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

The final screw requires the use of a 0.048/1.22 Hex screwdriver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10. Torque is 15Ncm. It is compatible with the following top (Ø 4...

This analog is for digital model use. Anodized with the color purple.

This analog is for digital model use.

This analog is for digital model use.

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.060 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a Nobel® Unigrip/Star...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings.  

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This premilled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.061 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.005 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This titanium temporary abutment comes with a screw, SKU 19.110, that takes a 0.050/1.27 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

This titanium temporary abutment comes with a screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex Driver.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex...

This ti base comes with a final screw, SKU 19.033 that takes a Straumann® Torx driver. The torque is 35 ncm. This ti base has a 2.0mm collar height. Wax up sleeve sold separately - SKU 33.001P5