This analog is for only stone models, NOT for digital models. It has a 4.5mm diameter and has a thicker wall than SKU 14.048 It is also available in a pack of 10 - SKU 14.049P10

This analog is for both stone model and digital model use. It is compatible with the following multiunit connections: Nobel® Branemark - 5.0. It is also available in a pack of 10 - SKU 14.047P10

This analog is for both stone model and digital model use.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. It is designed for use with implants placed 2mm-3mm subgingivally...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This latch style driver is made of stainless steel and is compatible with Ankylos® 1.00mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

The final screw requires the use of a 0.050/1.27 Hex screwdriver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10. Torque is 15Ncm. It is compatible with the...

This is a flat seat final screw that takes a Straumann® Torx driver. Torque is 15ncm. It is compatible with Straumann® Bone Level - Multi-Base. All of our screws are stress tested to 150% of the nominal torque value and can also be used as...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with the...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top of a Multiunit Abutment:  Nobel® Branemark WP 5.0 All of our screws are stress tested to...

This torque wrench adapter takes a latch style driver that is inserted into one end and turned - locking the driver into place. The other end of this adapter is a 4x4/square connection that fits into a torque wrench.

This multiunit driver fits the top of the Multiunit Abutments from DESS. It is compatible with the following multiunit connections: Nobel® Branemark - 5.0. The other end of this driver is a 4x4/square connection that fits into a torque wrench.

This latch style driver is made of stainless steel and is compatible with Nobel® Unigrip/Star screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This analog is for both stone model and digital model use. It is compatible with the Locator® system. It is also available in a pack of 10 - 14.054P10