The ELLIPTIBase® Ti base includes the final screw (SKU 19.443) and the torque is 35 Ncm.The ELLIPTIBase® Ti base is used for changing the screw access hole up to 25 degrees in any direction and...
The AngleBase® ti base comes with an angulated screw, SKU 19.443 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access...
The ELLIPTIBase® Ti base includes the final screw (SKU 19.468) and the torque is 25 Ncm.The ELLIPTIBase® Ti base is used for changing the screw access hole up to 25 degrees in any direction and...
The ELLIPTIBase® Ti base includes the final screw (SKU 19.417) and the torque is 30 Ncm.The ELLIPTIBase® Ti base is used for changing the screw access hole up to 25 degrees in any direction and is...
The ELLIPTIBase® Ti base includes the final screw (SKU 19.443) and the torque is 35 Ncm. The ELLIPTIBase® Ti base is used for changing the screw access hole up to 25 degrees in any direction and is gold anodized to improve aesthetics. The ANGLEBase® Latch Driver is required. The ELLIPTIBase® Ti base has a vertical wall for maximum bond retention with gold anodized and a SelectGrip® pre-sandblasted chimney. The chimney is oval “egg shaped” with the longer axis 3.3 mm from buccal to lingual and the shorter axis 2.8 mm from mesial to distal. "A corner" is identified as "Type A" in the library files, and "B flat" is identified as "Type B" in the library files. Explanation of ELLIPTIBase® Flat vs Corner
The ELLIPTIBase® Ti base includes the final screw (SKU 19.443) and the torque is 35 Ncm.The ELLIPTIBase® Ti base is used for changing the screw access hole up to 25 degrees in any...
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra®...
This titanium temporary abutment comes with a screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver.
It is compatible with the following multiunit connections: Nobel® Active,...
The AngleBase® ti base comes with an angulated screw, SKU 19.404 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the...
This angled multiunit abutment comes with a DLC screw that takes the .050/1.27mm Hex DriverA DLC coating is a diamond like coating that provides a low friction surface for a...
This multiunit driver fits the top of the Multiunit Abutments from DESS.
The other end of this driver is a 4x4/square connection that fits into a torque wrench.
