Screws Multiunit Compatible

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold.    It is compatible with...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold.  There are 10 screws in...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with the...

This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for a better hold. It is compatible with the...

This is a DLC final screw that takes a Nobel® Unigrip/Star driver. Torque is 20 Ncm. It is the replacement screw for the Nobel® Branemark - External Hex - 3.5(NP) - 17º angled multiunit abutments - part number: 41...

This is an Angulated Screw Channel (ASC) screw that takes the DESS Angulated Screw Channel driver.It can be used to move the screw access hole up to 25 degrees in any direction. This screw has a M1.4 screw thread and can be used on any of...

The final screw requires the use of a 0.048/1.20 Hex screwdriver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10. Torque is 15Ncm. All of our screws are stress tested to 150% of the nominal...

The final screw requires the use of a 0.048/1.22 Hex screwdriver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10. Torque is 15Ncm. All of our screws are stress tested to 150% of the nominal torque...

The final screw requires the use of a 0.050/1.27 Hex screwdriver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10. Torque is 15Ncm. All of our screws are stress tested to 150% of the...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top of Multiunit Abutments:  3i Biomet Certain® Low Profile & 3i Osseotite® External Hex  Astra...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top of Multiunit Abutments:  3i Biomet Certain® Low Profile & 3i Osseotite® External Hex ...

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top of a Multiunit Abutment:  Nobel® Branemark WP 5.0 All of our screws are stress tested to...

This is a 10 pack of final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm. It is compatible with the following top of a Multiunit Abutment:  Nobel® Branemark WP 5.0 All of our screws are...

This is an Angulated Screw Channel (ASC) final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any direction. It is compatible with the...

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. It's compatible with Straumann® Bone Level - Multi-Base and has a 45 degree head base. All of our screws are stress tested to 150% of the nominal...

This is a final screw that takes a .048/1.20mm hex driver. Torque is 10ncm. It is compatible with 3i® Low Profile Abutments (the multiunit connection for 3i® Certain and 3i® Osseotite) only. All of our screws are stress...

This is a 10 pack of final screws that take a .048/1.20mm hex driver. It is compatible with 3i® Low Profile Abutments (the multiunit connection for 3i® Certain and 3i® Osseotite) ONLY. All of our screws are stress tested to 150% of the...

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. This screw has a M1.4 screw thread and can be used on any of these Multiunits without any...

This final screw that takes a 0.050/1.27mm Hex driver.  Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments.  There are 10 screws in the package.  This screw has a M1.4 screw...

This is a flat seat final screw that takes a Straumann® Torx driver. Torque is 15ncm. It is compatible with Straumann® Bone Level - Multi-Base. All of our screws are stress tested to 150% of the nominal torque value and can also be used as...