Screws Multiunit Compatible

This is a 10 pack of flat seat final screws that take a Straumann® Torx driver.  Torque is 15ncm. It is compatible with Straumann® Bone Level Multibase. All of our screws are stress tested to 150% of...

This is an Flat Seat Screw final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any direction. ▶ It is...

This is an Flat Seat Screw final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any direction.  There are...

The final screw requires the use of a 0.048/1.20 Hex screwdriver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) o

The final screw requires the use of a 0.048/1.22 Hex screwdriver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abut

The final screw requires the use of a 0.050/1.27 Hex screwdriver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.  There is 1 screw in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments w

This is a final screw that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.  There are 10 screws in the package.  ▶ It is compatible with the following top (Ø 4.8 mm) o

This is a final screw for the AngleBase® Ti bases that takes the DESS Angulated Screw Channel driver. Torque is 15ncm. It can be used to move the screw access hole up to 25 degrees in any direction...