The AngleBase® ti base comes with an angulated screw, SKU 19.306 that takes the DESS angulated screw channel driver.
This ti base has a 0.3mm collar height and has a 4.5mm chimney height...
The AngleBase® ti base comes with an angulated screw, SKU 19.306 that takes the DESS angulated screw channel driver.
This ti base has a 0.3mm collar height and has a 4.5mm chimney height...
Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand...
This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand...
This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand...
This multiunit driver fits the top of the Multiunit Abutments from DESS. The other end of this driver is a 4x4/square connection that fits into a torque wrench.
This ti base comes with a final screw, SKU 19.006, that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15 ncm and is no...
This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver. There are 10 Ti Bases in the package.
This ti base has a 0.3mm collar height and has...
This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver.
The torque is 15 ncm.
This ti base has a 0.3mm collar height and the shaft/chimney is 8mm tall...
This ti base comes with a final screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15...
This ti base comes with a final screw, SKU 19.065, that takes a 0.048/1.22 mm Hex screwdriver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15...
This straight multiunit abutment and the screw are the one piece. The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment driver from Nobel®, BioHorizons®, 3i®, Neodent®, Hiossen, or MegaGen®.
It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments: 3i Biomet Certain® Low Profile & 3i Osseotite® External Hex Astra EV® Multibase Blue Sky Bio® (BSB) BioHorizons® Internal Hex, BioHorizons® Tapered Pro Conical, & BioHorizons® Conelog Hahn™ Hiossen® / Osstem Keystone® Genesis / Prima Megagen Anyridge® N Type Neodent® GM Nobel Active®, Nobel Replace®, & Nobel Brånemark® (NP and RP) Noris Medical® DESS® Multiunits
