This is a final screw that takes a .048/1.20mm hex driver. Torque is 20ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons® Conical...
This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It also comes with the final screw (SKU 19.051). Holders for premills: Holder HLDSTD - 98mm...
Use from Neodent® or DESS® Neodent® compatible driver DT35NG or the Nobel® Unigrip/Star driver.
One implant platform/connection for all implant diameters. Recommended Torque: 20NCM.
This premilled titanium blank is engaging, 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw (SKU 19.054). Holders for premills: Holder HLDSTD - 98mm disc...
This Ti base has a 2.5 mm collar height and comes with a final screw (SKU 19.054) that takes a Straumann® Torx 06 driver.
One implant platform/connection for all implant diameters. Recommended...
This Ti base has a 1.5 mm collar height and comes with a final screw (SKU 19.054) that takes a Straumann® Torx 06 driver.
One implant platform/connection for all implant diameters...
This is a final screw for the ELLIPTIBase® Ti bases that takes the DESS Angulated Screw Channel Driver. Recommended torque: 15ncm. It is compatible with Nobel® Active3.0 and Astra EV 3.0...
