This angled abutment comes with a screw that takes a .048/1.20mm hex driver - 19.034 This abutment is prep-able and has a 2mm collar height.

This angled multiunit abutment comes with a DLC screw that takes the .048/1.20mm Hex DriverA DLC coating is a diamond like coating that provides a low friction surface for a better hold. The top of this angled multiunit abutment is 4...

This angled multiunit abutment comes with a DLC screw that takes the .048/1.20 mm Hex DriverA DLC coating is a diamond like coating that provides a low friction surface for a better hold. The top of this angled multiunit abutment...

This angled multiunit abutment comes with a DLC screw that takes the .048/1.20 mm Hex DriverA DLC coating is a diamond like coating that provides a low friction surface for a better hold. The top of this angled multiunit abutment...

This angled multiunit abutment comes with a DLC screw that takes the .048/1.20 mm Hex DriverA DLC coating is a diamond like coating that provides a low friction surface for a better hold. The top of this angled multiunit abutment...

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .048/1.20mm hex driver.

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .048/1.20mm hex driver. 

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .048/1.20mm hex driver.

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .048/1.20mm hex driver.

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .048/1.20mm hex driver.

This all plastic castable abutment is made of polyoxymethylene and includes a final screw that takes a .048/1.20mm hex driver.

This analog is for both stone model and digital model use.

This analog is for both stone model and digital model use. It is also available in a pack of 10 - SKU 14.012P10

This 10 pack of analogs is for both stone model and digital model use.

This analog is for both stone model and digital model use.

The AngleBase® ti base comes with an angulated screw, SKU 19.402 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.402 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.402 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.402 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.402 that takes the DESS angulated screw channel driver. The torque is 35 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...