This is a final screw that takes a .050/1.27mm hex driver. Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical...
This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver.
The torque is 20 ncm.
This ti base has a 0.3mm collar height.
Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately - SKU...
This ti base comes with a wax up sleeve and a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.5mm collar height and is no longer...
This ti base comes with a wax up sleeve and a final screw, SKU 19.045 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height.
This scan body is made of titanium and is designed for both intraoral use and desktop scanning. It has a fixed internal screw and the scan body is hand tightened.
The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing...
