Camlog® Ti Bases Compatible

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction. This...

The AngleBase® ti base comes with an angulated screw, SKU 19.444 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction...

This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.5mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height. Wax Up Sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a wax up sleeve and a final screw, SKU 19.045 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height.

This ti base comes with a wax up sleeve and a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.5mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a wax up sleeve and a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a wax up sleeve and a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a wax up sleeve and a final screw, SKU 19.045 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height and is no longer being made with an anti-rotational flat side.